Product Description
Slik PRO CF-734 Carbon Fiber Tripod with PBH-535AS Ball Head Kit
The Slik PRO CF-734 Carbon Fiber Tripod with PBH-535AS Ball Head Kit is constructed from carbon fiber to maximize durability while limiting weight. It supports up to 11 lb and measures 18.7″ when folded. Each of its 4-section legs feature independent spread, a 3-position angle lock, twist locks for rapid deployment, and rubber feet to help enhance stability on a wide variety of surfaces. The included push-and-pull, rapid center column is removable, which permits a minimum height of 7.1″. The SLIK Pro CF-734 Tripod provides a maximum height of 52.2″ and 65″ with the column fully raised.
Tripod heads, cameras, lenses, or sport optics with 1/4″-20 or 3/8″-16 female accessory threads can be directly connected to the reversible mount on top of the tripod’s center column. For added versatility, the center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod’s legs instead of above them. To further enhance stability on a wider variety of surfaces, including soft and uneven soil, the rubber feet can be removed and replaced with a separately available SLIK 618-410 Spiked Foot Set.
Use and Handling
- Supports up to 11 lb
- Push-and-pull center column with ballast hook for rapid camera, lens, or sport optic positioning
- Center column is removable, which allows the tripod to be set at a minimum height of 7.1″
- Tripod can be set to a maximum height of 52.2″ and 65″ with the column fully raised
- Column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod’s legs instead of above them
- Legs each feature four sections, an independent spread, a 3-position angle lock, and a twist lock for rapid deployment
- Rubber feet for stability
- Weighs 2.9 lb, measures 18.7″ when folded
Construction Details
- Carbon fiber legs
- Center column platform with reversible 1/4″-20 and 3/8″-16 mount
Slik PBH-535AS Ball Head with 6507 Quick Release Plate
The SLIK PBH-535AS Ball Head with 6507 Quick Release Plate is an Arca-type ball head that has a load capacity of 11 lb and can be attached to tripods or other support systems that feature a 3/8″-16 mount. A reducer bushing is provided, which allows this ball head to be attached to tripods or other support systems that feature a 1/4″-20 mount.
Cameras or accessories that are compatible with a 1/4″-20 mount can be connected to the included 6507 Quick Release Plate. The quick release plate can be attached or removed from the Arca-Type clamp located at the top of the head’s ball-and-socket joint by pulling clamp’s integrated cam lock lever, which also allows the plate to be reattached. The quick release plate features a rubberized, non-slip platform while a built-in bubble level along the edge of the clamp accommodates landscape orientations.
By loosening the ball head’s primary locking knob, the head’s ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Variable tension can be applied to the ball-and-socket joint’s movements by rotating the friction knob located on the opposite side of the primary locking knob. Between the primary locking knob and friction knob is a secondary locking knob, which controls the ability to rotate the head 360°.
- Load Capacity: 11 lb
- Ball-and-Socket Tension Control
- 360° Pan with Independent Lock
- Up to 90° Portrait Angle Tilt
- Arca-Type Compatible Clamp with Cam Lock
- Built-In Bubble Level
- 6507 Quick Release Plate
- 1/4″-20 Folding-Wing Thumb Screw Mount
- Non-Slip Surface
- Aluminum-Alloy Construction